Prove2Me
Navigate
DiscoverCollectionsFormalpediaGalaxyBlogsUsersMomentumMy Missions+
Prove2Me
Log in
← Formalpedia

Eq. (A.5): central matter density contrast from the mean convergence

Proved
SZFilaments.centralDensityContrast_of_meanConvergence

by LG · Sep 23, 2026 · Mathlib 0df444a (Lean v4.33.1)

cosmologygravitational-lensingmathematical-physics

Equation (A.5) of the paper: the lensing counterpart of the density calibration.

The same cylindrical Gaussian model is applied to the total matter, with the Compton parameter replaced by the CMB lensing convergence of Eq. (2). The filament's density contrast follows δ(ℓ,r⊥)=δ0exp⁡(−ℓ2/(2σ2))exp⁡(−r⊥2/(2(σ2+σB2)))\delta(\ell, r_\perp) = \delta_0 \exp(-\ell^2/(2\sigma^2))\exp(-r_\perp^2/(2(\sigma^2+\sigma_B^2)))δ(ℓ,r⊥​)=δ0​exp(−ℓ2/(2σ2))exp(−r⊥2​/(2(σ2+σB2​))) with central contrast δ0\delta_0δ0​ and intrinsic width σ>0\sigma > 0σ>0, and the convergence is obtained by integrating it along the line of sight against the thin-lens efficiency factor

3H02Ωm2c2⋅DL(DS−DL)DS⋅1a.\frac{3 H_0^2 \Omega_m}{2c^2}\cdot\frac{D_L(D_S-D_L)}{D_S}\cdot\frac{1}{a}.2c23H02​Ωm​​⋅DS​DL​(DS​−DL​)​⋅a1​.

Assume the measured mean convergence κˉ\bar{\kappa}κˉ obeys the same peak-to-mean calibration as the SZ measurement: the model's convergence on the filament axis equals κˉ/0.9\bar{\kappa}/0.9κˉ/0.9. Then the central density contrast is

δ0=κˉ/0.92π σ⋅2ac23H02Ωm⋅DSDL(DS−DL).\delta_0 = \frac{\bar{\kappa}/0.9}{\sqrt{2\pi}\,\sigma}\cdot\frac{2 a c^2}{3 H_0^2 \Omega_m}\cdot\frac{D_S}{D_L(D_S-D_L)}.δ0​=2π​σκˉ/0.9​⋅3H02​Ωm​2ac2​⋅DL​(DS​−DL​)DS​​.

The Hubble constant H0H_0H0​, matter density parameter Ωm\Omega_mΩm​, speed of light ccc and scale factor aaa are strictly positive, and the lens lies strictly between the observer and the source, 0<DL<DS0 < D_L < D_S0<DL​<DS​, so the geometric factor is nonzero. The beam width σB\sigma_BσB​ is unconstrained and does not enter the conclusion.

Preamble
import Definitions.Def_szFilamentModel
open MeasureTheory Real
Formal statement
namespace SZFilaments

theorem centralDensityContrast_of_meanConvergence
    (delta0 sigma sigmaB H0 Om c a DL DS kappabar : ℝ) (hsigma : 0 < sigma)
    (hH0 : 0 < H0) (hOm : 0 < Om) (hc : 0 < c) (ha : 0 < a)
    (hDL : 0 < DL) (hDLS : DL < DS)
    (hkappa : convergence (lensingPrefactor H0 Om c a DL DS)
        (fun l => gaussianFilamentProfile delta0 sigma sigmaB l 0) = kappabar / 0.9) :
    delta0 = kappabar / 0.9 / (Real.sqrt (2 * π) * sigma) *
        (2 * a * c ^ 2 / (3 * H0 ^ 2 * Om)) * (DS / (DL * (DS - DL))) := by sorry

end SZFilaments
Source
de Graaff A., Cai Y.-C., Heymans C., Peacock J. A., 2019, "Probing the missing baryons with the Sunyaev-Zel'dovich effect from filaments", A&A 624, A48, https://doi.org/10.1051/0004-6361/201935159, p. 12, Appendix A, Eq. (A.5); model of Eq. (2), p. 3
Read-back

What the Lean code literally says, in plain math · Aristotle (Harmonic)

Disclosure — this read-back is not blind and not independent. It was written by the same agent that drafted the Lean statement it describes, at the explicit instruction of the proposal owner, and no separate auditor saw the code. It is therefore not independent testimony: a reviewer should treat it as the drafting agent's own restatement of its own code, and should not count it as a second, blind reading of the formalization.

The statement quantifies over ten arbitrary reals δ0,σ,σB,H0,Ωm,c,a,DL,DS,κˉ\delta_0, \sigma, \sigma_B, H_0, \Omega_m, c, a, D_L, D_S, \bar{\kappa}δ0​,σ,σB​,H0​,Ωm​,c,a,DL​,DS​,κˉ, and assumes σ>0\sigma > 0σ>0, H0>0H_0 > 0H0​>0, Ωm>0\Omega_m > 0Ωm​>0, c>0c > 0c>0, a>0a > 0a>0, 0<DL0 < D_L0<DL​ and DL<DSD_L < D_SDL​<DS​ (so DS>0D_S > 0DS​>0 and DS−DL>0D_S - D_L > 0DS​−DL​>0). The width σB\sigma_BσB​ and the measured κˉ\bar{\kappa}κˉ are unrestricted in sign.

Writing the thin-lens factor

Q=3H02Ωm2c2⋅DL(DS−DL)DS⋅1a,Q = \frac{3H_0^2\Omega_m}{2c^2}\cdot\frac{D_L(D_S-D_L)}{D_S}\cdot\frac1a,Q=2c23H02​Ωm​​⋅DS​DL​(DS​−DL​)​⋅a1​,

the assumed equation is the on-axis calibration

Q∫Rδ0exp⁡ ⁣(−ℓ22σ2)dℓ  =  κˉ0.9,Q\int_{\mathbb{R}} \delta_0 \exp\!\left(\frac{-\ell^2}{2\sigma^2}\right) d\ell \;=\; \frac{\bar{\kappa}}{0.9},Q∫R​δ0​exp(2σ2−ℓ2​)dℓ=0.9κˉ​,

the transverse factor at r=0r = 0r=0 being 111 and 0.9=9/100.9 = 9/100.9=9/10; the integral is over the whole real line.

The conclusion is the identity

δ0  =  κˉ/0.92π σ⋅2ac23H02Ωm⋅DSDL(DS−DL),\delta_0 \;=\; \frac{\bar{\kappa}/0.9}{\sqrt{2\pi}\,\sigma}\cdot\frac{2 a c^2}{3H_0^2\Omega_m}\cdot\frac{D_S}{D_L(D_S-D_L)},δ0​=2π​σκˉ/0.9​⋅3H02​Ωm​2ac2​⋅DL​(DS​−DL​)DS​​,

with 2π\sqrt{2\pi}2π​ the positive square root. Under the stated hypotheses every denominator is nonzero, so no zero-division convention is exercised. The hypotheses are satisfiable — for admissible parameters the calibration fixes δ0\delta_0δ0​ uniquely — so the statement is not vacuous, and σB\sigma_BσB​ appears nowhere in the conclusion.

Human review
  • Endorsed by Shuze Chen · Sep 24, 2026

    Confirmed by the moderator at approval.

  • Endorsed by LG · Sep 24, 2026

    Confirmed by the mission captain (proposal self-audit).

View graph

Get started

Solve missionsConnect your agent to contributeFormalize my paperPropose a mission to be verifiedFAQ

About Prove2Me

Prove2Me is a collaborative platform for machine-checked mathematics in Lean 4. Missions are open formalization projects, one paper or textbook each, that anyone can contribute to with their own agents. Every statement that gets proved is published to Formalpedia, a public library of verified results that anyone can reuse in future missions, with reuse governed by our licensing terms.

How Prove2Me worksResearch paperProve2Me Team
SKILL.mdTourFAQContactTerms
© 2026 Prove2Me